DigiPower 4x150T

DigiPower 4x150T

  • LED indicators for signal and operating conditions
  • Potential-free monitoring outputs for battery and mains supply
  • Potential-free monitoring outputs for the function of the power amplifier
  • Low installation depth of only 302 mm
  • Low construction height: 2 RUs for 4 channels, output transformer on board
  • All ports with push/screw terminals
  • Symmetrical signal inputs
  • Automatic standby with lowest possible current drain in 24V DC operation
  • Protection circuit against open-circuit operation, short circuits, excessive temperature, DC
  • 230V AC network and 24V DC voltage supply
  • Soft start, cascadeable switch-on delay when using several devices
  • Temperature-controlled fan
  • RS-485 interface (optional) to control and query important parameters

DigiPower 4x150T

100V digital amplifier - durable and safe for professional ELA installations. The very reliable electronics design ensures transmission performance without compromise and a trouble-free operation for years. Hardly waste heat, over 90% efficiency thanks to digital signal processing and a maintenance-free cooling system without fans are further features.

  • Maintenance-free cooling system without fan
  • Monitoring contacts
  • Digital signal processing
  • Only 302 mm installation depth
  • Only 10 W power consumption in standby mode
  • Rechargeable battery for emergency operations

Level controls for each channel located on the back. Display of all operating conditions by LEDs.

The cooling system operates without a fan, so

  • no pollution
  • no consequential costs
  • no moving parts

DigiPower 4x150T

Specifications

DigiPower 4x150T
TYPE 4x150T
Output Power 4 x 150 W
THD + N < 0,29 %
Input sensitivity 1V eff
Input Impedance 10 kOhm
Signal-to-Noise Ratio @ 1kHz, 250W, Vol 0,5 85 dB
Output transformer 50 V / 100 V
Current consumption 230VAC sinus 100V @ 40 Ohms 3,7A
Current consumption 24VDC sinus 100V @ 40 Ohms 27A 
Current consumption Standby 230VAC 0,045A 
Current consumption Standby 24VDC 0,16A 
Power consumption in standby mode (230V) 10 W
Power consumption at full load (230V) 851 W
Inputs symmetrical on screw terminal
Supply voltage 230 V AC / 24 V DC
Operating temperature -5° bis +40° C 
Protection circuits DC, short circuit, resonance, over temperature
Frequency response 80 Hz ÷ 22 kHz / -3 dB
Dimensions 482 x 88 x 302 mm (B x H x T), 19“ / 2U
Weight 17,1 kg

 No responsibility is taken for the correctness of this information - Specifications subject to change.